Flying-Hobby
SPARTAN SIMPLEX DATA ADAPTER (SLX ADAPTER)
,
Certain Spartan products such as the Quark gyro have the ...Flying-Hobby
SAB FLYBARLESS SUPPORT - GOBLIN 700 / 630
,
Product description 3 x Flybarless Support 1 x SUPPORTO FLYBARLESS ...Flying-Hobby
1S/5A ESC - MCPX
| Voltage | 1S 3.7V |
Included:, (1) Brushless ESC Board, What’s Needed:, (1) Brushless Converter, Technical Specifications:, Amp Rating: 5A,
Brushless Power for the Eflite Blade mCPX Brushless power is ...Flying-Hobby
THUNDER TIGER E325 SE/V2 PRECISION SHIELDED BEARING KIT
Precision Metal Sheilded Bearing Kit features:,
Product description Includes All Bearings (Std, Flanged & 3-Piece Thrust) ...Flying-Hobby
SAB MAIN PULLEY 37T - GOBLIN 700 / 630 / 770
,
Product description 1 x PULLEY Z 37 1 x Socket ...Flying-Hobby
SLITE SELECTED PROFESSIONAL TOOL 3PCS
Attention:, The peak is hard and sharp, please keep it well don't use it exceed the use range, Feature:, A range of high quality stainless steel tweezers, designed to meet the requirments of the electronics and precision engineering industries, Materials:, Super Hard, Included:, ST-12ESD x 1,
Product description Fine Super Tweezer ANTI-MAGNETIC ANTI-ACID STEEL ST-13ESD x ...Flying-Hobby
IN-FLIGHT VOLTAGE LOGGER & HEALTH ANALYZER
| Working temperature | -20 C-50 C |
| Weight | 10g |
| Size | 53x 29x 5mm |
| MAX *** The maximal voltage. The display of the highest cell voltage of the battery. Picture 2 | MAX U3 |
Introduction:, With 6 months development, improvement and test, the new battery voltage logger and health analyzer has been released to the market. The R1 is not only an accurate 6S battery voltage cell meter, but also integrated with battery health analysis function. So it's really a necessity to the model pilots., Specification:, , Feature:, Small, light and ultra-portable with only 5mm thickness, including LCD screen., Remarks and attentions:, -Due to the battery pack loading drop, to avoid the voltage measurement difference error, make sure the battery pack is disconnected at least 30 seconds., How to Use:, , 1. Normal battery voltage check:, Connect the battery to the R1 after the battery is unloaded for at least 30 seconds. To connect the battery balance plug to the R1, always use the pin 1 on the R1, and make sure the negative pin of the battery balance plug is connected to the R1 pin 1. For example: if a 3S Li-Po pack need to be measured, connect the battery to R1 1~4 pin, and the negative pin on the balance plug is connected to pin 1; If a 5S battery pack, then connect the battery to pin 1~6, and the negative balance plug still to pin 1. Now you can read voltage value on the display., 2. Lowest voltage recording:, The lowest voltage recoding function is designed for the purpose of logging the lowest voltage value when the battery is loaded during the flight, then it's possible for the pilots to understand how their battery works., Activate the function:, [A]. Connect with the battery, after the R1 is initialized, press ¡§A¡¨ button till the ¡§hold¡¨ appears on the bottom-right on the screen, which means the lowest voltage capturing (LVC) mode is enabled., Connect the R1 with battery, and enter health analysis function. Then it indicates the following:, M,
User's manual Voltage value and capacity display. Up to 6 ...Flying-Hobby
3DX500- 0.6M 20T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS
,
Product Details For pinions as tough as a Rhinoceros! Try ...Flying-Hobby
PHOENIX SQUARE MICRO ADAPTER FOR FUTABA TRANSMITTER
,
Product description This is a Phoenix Square Micro Adapter Cable ...Flying-Hobby
DIGITAL ANEMOMETER
| *Measurement items | Air velocity, Air temperature |
| ----Air velocity | 0~30m/s, 0~90km/h, 0~5860ft/min, 0~55knots, 0.87~65mph (± 5%) |
| ----Air temperature | -10~45º C, 14~113º F (± 2º C) |
| *Resolution | 0.2º C, 0.2m/s |
| *Display | LCD |
| ----Air velocity sensor | Plastic impeller, magnetic induction |
| ----Temperature sensor | NTC thermometer |
| *Low battery indication | Yes |
| *Auto power shut off | 14 minutes without any operation |
| *Backlight | 12 seconds active by press any key |
| *Packing | Blister+Card |
| *Power | CR2032 3.0V |
| *Dimension | 104.3x57.8x19.9mm |
| *Net weight | 52g (including battery) |
*Measurement range:, *Sensor:,
Product Description Anemometer GM816 *MAX/MIN/AVG readingFlying-Hobby
KDE DIRECT 450XF-3500 HP BRUSHLESS MOTOR, 3500KV (450-CLASS)
| Maximum Power | 1,200+ W |
| Continuous Power | 725+ W |
| Maximum Efficiency | 90% |
| Optimized Voltage | 11.1 V (3S) |
| Io (@10V) | 3.6 A |
| Rm (Wind Resistance) | 0.009 Ω |
| Magnetic Poles | 8, 12S8P |
| Bearings | Quad, 696ZZ/MR106ZZ |
| Stator Class | 2618, 2D |
| Shaft Length | 18.5mm |
| Motor Diameter | 33mm |
| Motor Length | 36mm |
| Connectors | 4.0mm, 24k Bullets |
| ESC PWM Rate | 12 - 16 KHz |
Specifications:, Kv:3,500 rpm/V, Voltage Range:, 11.1 V (3S) - 14.8 V (4S), Mount Pattern:, M3 x 19mm, M2.5 x 16mm, Shaft Diameter:, 3.5mm (4mm Internal), Motor Weight:, 105 g (115 g with Wires/Bullets), Cooling System:, High-Volume Radial Fan,
This is the KDE Direct 450XF-3500 High Performance Brushless 450 ...Flying-Hobby
SAB ALUMINUM TAIL CASE SPACER - GOBLIN 700 / 630
,
Product description 2 x Aluminum Tail Case Spacer 4 x ...Flying-Hobby
SAB CARBON FIBER TAIL CASE SIDE - GOBLIN 700 / 630
,
Product description 1 x Carbon Fiber Tail Case Side 2 ...Flying-Hobby
SAB ABEC-5 MAIN SHAFT BEARING SUPPORT W/BEARING - GOBLIN 700 / 630 / 770
,
Product description 1 x Main Shaft Bearing Support w/Bearing 1 ...